Hisense Roku TV Won’t Turn On: 6 Torubleshooting Tips

Hisense-Roku-TV-Wont-Turn-On

As you are all set to tuck in for the night and enjoy a marathon of the latest episode of your favorite series, you find out that your Hisense Roku TV won’t turn on. Due to this, you begin to panic, trying to understand what the problem could be. Don’t worry, you’re not in this alone. However many Hisense Roku owners in this case face this issue and there are several avenues to troubleshoot and fix it. In this article, we are going to discuss the reasons for this issue in detail and also suggest means of resolving it. No matter whether you are enthusiastic about technology or just about the quality home entertainment experience, these points will be useful.

Methods to Fix Hisense Roku TV Won’t Turn on

Check Power Outlets

The first action you should take if you want to fix the problem of Hisense Roku TV is to check the power outlets. In some cases, it might not be the TV that has the problem but the power supply. As a safety concern make sure it’s only one gadget that you plug in the outlet you’re using. If the other device lights up, then there is nothing wrong with the outlet.

If not, then try looking for another outlet or check your circuit breaker if there are any blown fuses. As for the operating switch of the outlet, it is also wise to look at the cord from the power supply. A connection that is loose or not securely attached can inhibit the ability of the TV to get its power.

Check if the plug is properly put into the socket and check the cord for damage. A burnt power cord can be a solution for this scenario. Check further if your socket does not have a wall switch which has been closed mistakenly. Common mistake but easily resolved by moving the switch to the ‘on’ position.

Read: Hisense TV No Sound

Is The Power Enough?

Another reason that your TV may not be working is due to electrical fluctuations or the device not obtaining the needed power. Check if the voltage supply is suitable for the TV as under voltage supply might cause no response from the device. One of the measures that you can take to protect your television from power problems is that you can buy a voltage stabilizer, to prevent damage from excess voltage or fluctuation.

If you live in an area where the power supply is erratic, you may have to use a voltage stabilizer. It makes sure that all your TV gets constant voltage and are protected from low or high voltages which may be harmful. Also, high high-capacity circuit fails if you connect a few high-rated appliances on the same circuit as your TV. If it concerns you, try disconnecting a few devices from the power strip that is using multiple outlets and see if this solves the problem.

Unplug Connected Devices from the TV

Controllers, external sound systems, and broadcast media players can also prevent the device from turning on. Remove all external devices and cables. This action aims at identifying the possible source of the problem. After the above step, switch on the TV again. If the TV does come on, when no peripherals are attached then it could imply that one of the non-existing peripherals is likely to be malfunctioning.

Continue this process and test the TV after connecting each device. After identifying the device that makes powering on difficult, check the settings related to the power and the connection. It may need a firmware upgrade or may need complete replacement. Avoid similar problems in the future by making sure that all devices you connect to the main television unit are updated and not defective.

Perform a Reset

A Hisense Roku TV not turning on due to certain internal faults may be remedied by a resetting operation. Begin with a straightforward soft reset, which involves unplugging the TV from the mains power supply. If power disconnection is done, plug the TV after waiting for 60 seconds. This step does help in addressing short-term problems and refreshing the system. If a soft reset doesn’t work, try a hard reset.

This method allows the user to revert the television’s settings to the conditions at which it was shipped. To avoid complexity in the return of settings, a hard reset must be studied considering the type of manual attached to the TV. It is worth noting in hard reset that some basic clues like the last locations and channels as well as borderless frames are erased.

There should be no spectacle appearing out of order in fast motion ever Quest Graphics here refers to the following proximity factors: Frequently- visiting Relatives or friends, Travelling or Moving family absences, etc. Before going ahead with a hard reset, it is prudent to write down the settings that the user would like to revert to after completing the hard reset.

Force Restart Hisense Roku TV

When there is no response from the TV even after the step stated above, then a force restart is warranted. This method is made use of when the TV seems to be on but the display is completely black or,” frozen.” Most Hisense Roku Televisions come with a small reset button which is positioned on the rear or side casing.

Press with a small object, like a paper clip, and hold a few seconds until the TV comes on again. It is important to note that caution should be taken when performing a force restart because holding the button for a long period may cause the TV to perform a factory reset. A user manual should be consulted just to be sure that anyone is performing the right procedures.

A force restart works to remove any temporary kind of software bugs without moving any slapped configurations. This is the most common practice given the occurrence and normality of software errors or bugs, controlling how a TV freezes and refuses to function. Such problems can also be avoided by routinely updating your TV’s firmware.

Visit the Service Center

If troubleshooting has not worked, it is time to go to the service center. A service center contains qualified personnel who can tackle some of the more delicate issues. They can undertake the replacement of broken parts which many average users find challenging in replacing them over the normal way. 

All the provided papers about the warranty and proof of purchase should accompany the television set for any repairs at the service center. With these papers, you can get your television set repaired at little or no cost if provisions for such have been made in the warranty. The experts will assess the situation and decide whether to advise repair or a purchase of a new product.

It’s safer to leave it to experts as any attempt to dismantle the television could not only damage it further, it also void any warranty that was on the set. If an authorized service center is regularly visited for maintenance checks, the life span and the performance of the television can be improved.

FAQ’s

Q: What should I do when my Hisense Roku TV is not working with the remote control?

A: First things first, check if the remote has any batteries that are functioning. If required, change them. And in case this does not help, then reset the remote by taking the batteries out and pushing every button twice.

Q: Is my Hisense Roku TV broken because I see nothing on the screen?

A: Not really. This can happen due to several reasons including setting the wrong inputs or using a bad HDMI cable. Make sure the TV is on the correct input, and that all the plugs they are inserted into are properly secured.

Q: Can a power surge damage my Hisense TV?

A: Yes, power spikes can be very harmful to many electronic devices, such as TVs. To avoid this problem, a surge protector should be used.

Q: How often should you update your Roku TV firmware?

A: Firmware updates are recommended to help sustain efficiency and safeguard against crisis. Remember to do updates periodically about new sudden firmware updates by the company.

Q: What can I do if the television’s buttons do not respond?

A: If the physical buttons of the TV are unresponsive, try to remove the cable from the PowerPoint for about a minute and then return it to its place. If it is not resolved, go to the service center.

Conclusion

We all experience problems with electronics sometimes and obviously, the most frustrating one is the Hisense Roku TV which refuses to turn on. Most of the time, people do not seek additional help as they are confident that they will solve the problem themselves.

By reading this detailed guide, you will know how to troubleshoot the issue and make your TV work again. Note: Most of these problems may not arise in the first place given enough diligence and activeness from the users, routine care and timely updates should help. And lastly, if these do not help, there is always the option to take the television in for professional help.

James William, the CEO and the lead writer of Hisense TV Master, is a tech enthusiast with years of experience in tech journalism. Through insightful reviews and guides, he makes complex tech easy to understand. James journey began in college as a tech guru, and he now offers personalized recommendations and timely updates on Hisense products. He aims to make this site a top resource for all Hisense TV fans.