Thank you for reading this informative post on how to reboot a Hisense Smart TV. It is not unusual for TV to experience operational problems, program errors or any other complications or people may have reasons to want to reset their TVs to default factory settings. This post is designed to show the procedure for a reset in various models of Hisense TV whether it is an old model or, a new model which is, Hisense Roku TV, Hisense VIDAA TV, Hisense Android TV, Hisense Google TV, Hisense Fire TV among others. After reading this article, making your television set a little better than the standard version will not be such a monumental task in question.
In this article, we will describe the step-by-step guide for resetting different types of Hisense TV sets. The first section of this article will focus on the 2013 models and the method to reset them respectively, after that the article discusses how we can reset models after 2014. Furthermore, it will include the procedure of resetting Hisense Roku TV, Hisense VIDAA TV, Hisense Android TV, Hisense Google TV, and Hisense Fire TV.
Furthermore, we will look into other ways of resolving prevalent issues without having to reset the Hisense television. You will be able to get this knowledge and you will be able to reset the Hisense TV to enhance its performance over the years.
Instructions for Performing a Factory Reset on Hisense TV Models Older than 2013
Reverting back to factory settings in the older models of hisense TV which were launched back in 2013 may appear to be the biggest task but actually, it is a simple procedure with the help of instructions. Here’s how to Factory Reset your Hisense older TV in detail:
1. The first step is to switch off your Hisense TV by using the button for a remote or the TV itself instead. Wait until the Television is off for a second before proceeding.
2. The moment the TV has gone off, unplug the cord from the electrical switch. This procedure ensures that the television has fully been cut off from the wall allowing a proper reset.
3. For a good 30 seconds to 1 minute leave the television power plug out of the switch. This temporary stopping makes sure that all the power in the internal components of the television has gone.
4. After this time elapses, the power cord can again be plugged into the power source. Check that the connection is complete and the Television receives power.
5. Switch on the television using either the remote control’s power button or the TV itself. When the TV is turned on, the Hisense logo or the setup wizard screen should appear.
6. Go to the settings menu of the television by using the remote control. For most remotes, this is accomplished by pressing the appropriate button labeled “Menu” and then selecting “Settings.”
7. In most, however, when your phone is already rooted open the settings of the television and look for the option where you can reset your phone to its factory settings. The location and language might differ per unit but one can generally find them under headings, such as System, Reset, Support, and the like. Harshda stick factory reset and accept the consent prompt.
8. Proceed through the factory reset steps automated on the screen. The set will reboot and ON once again and the television will be in factory condition.
Following these steps, an older TV model manufactured in 2013 under the Hisense brand may be reset and basic functions restored.
Read: Hisense TVs So Cheap
Instructions for Performing a Factory Reset on Hisense TV Models
Resetting a newer model (from 2014 onwards) of Hisense TV is more sophisticated due to the sophisticated nature of these newer models. Below is an understandable algorithm for resetting these types of models:
Reboot your TV with the use of Remote Control
1. To achieve this action, first, power on your Hisense TV. Make sure that the device is plugged into a proper electrical outlet.
2. Get your remote control and once the main menu appears, click “Menu” to access the TV’s Menu.
3. To access the menu options, press the “System” or “Device Preferences” options using the navigation buttons of the remote.
4. Within the configuration options found under the Systems settings, scroll down to ‘Reset’ or ‘Factory Reset’ and select the same.
5. After selecting your option, a window will pop out asking if you want to do that. Follow the instruction “Yes” or “Confirm” if that is what the strained word is marketing to say, after any such prompting that there is. The Television resets to factory settings from this point and it will take a couple of minutes.
6. The television will restart on its performance. The television will display the first-time configuration screen which means the television has been reset correctly.
Using the Reset Button on Your Hisense TV to Perform a Reset
On certain latest models, a hard reset can also be performed using the reset key provided on the TV. This is how to do it:
1. Locate the reset key on your Hisense TV. It should be situated on the rear or side of the TV and may state Reset.
2. Take a pointed object like a paper clip and pry the reset key while ensuring it is pressed down for approximately 15 to 20 seconds.
3. Then you will let go of the reset key and primarily wait for the television undergoes restart.
4. The Television set will undergo the steps of resetting it and later on, restarting bringing you to the first-time setup screen.
Therefore, these steps would also work for the newer versions of Hisense TV models 2014 and above reset properly.
What is the Process of Resetting the Hisense Roku television?
The procedure for resetting the device changes because of the operating system in use. It is the Roku operating system. This is how you do it:
How to Factory Reset Hisense Roku TV using a Remote
1. First of all, ensure that your Hisense Roku TV is working properly on a power supply.
2. On the Roku remote control, you can locate the ‘Home’ button which takes you to the main screen.
3. After that, use the cursor and move downwards to the list from where you will click on ‘settings’.
4. Use the option “System” in the drop-down menu of the “Settings” tab.
5. See below and tap on “Advanced system settings”.
6. Click on the “Factory reset” button then “Factory reset everything”. The screen will display a code that will need to be keyed in to effect the reset.
7. Key in the code and the rest of the instructions as they appear on the screen. The TV will restart by itself and the first time setup will show on the screen.
It is by way of these steps that you will reset the Hisense Roku TV and troubleshoot a lot of issues thereby enhancing the experience on the TV.
How to Perform a Reset Operation on Hisense VIDAA Television?
Another operating system that some of the Hisense smart televisions came shipped with is the Hisense VIDAA OS. This is the method for resetting a Hisense VIDAA TV:
Complete a factory reset of the Hisense VIDAA OS TV using the Remote Control
1. Make sure that your Hisense VIDAA TV is plugged in and it is powered on.
2. Press the button on your remote control that says “Menu” to show the menu options.
3. Select the “Settings” option as you navigate using the buttons on the remote.
4. Locate “Reset”, or “Factory Reset” in the available options listed in the “System” settings.
5. Confirm the selection you make in this then hit “Yes” or “Confirm” to continue with the course of resetting. The television set will then initiate the factory reset procedure which could also take some minutes.
6. After the procedure is completed, the television set will reset itself automatically. An initial setup page should appear which shows that the reset was accomplished.
In these steps, the user is instructed on how to effectively reset the Hisense VIDAA TV and restore its full functionality.
How do you reset the Hisense TV that operates on the Android system?
Expanding the horizons of technical reset knowledge, resetting a Hisense Android TV can be done by simply following these directions:
Hisense Android TV Factory Reset From Any Connected Remote Control
1. Begin by making sure that your Hisense Android TV is powered ON and connected to a stable source of power.
2. You are supposed to press the “Home” button found on the remote control to go to the home screen. You Then go to the Settings section.
3. Open the ‘Settings’ sub-option on the options bar and choose ‘Device’.
4. Find and click on the ‘Reset’ option towards the bottom of the page.
5. Click on the option “Yes, erase all user data” which enables factory data reset.
6. Complete the reset by following the instructions on the screen. The television set will then restart and display the original configuration screen.
You may achieve this by following these steps which will lead you to the resetting of your Hisense Android TV, fixing most problems, and restoring the functionality of the TV.
How do I reset my Hisense television that has Google TV?
Google TV is a version of the Android TV but an even more improved one with extra advantages. Here is a guide to resetting a Hisense Google TV:
Hisense Google TV Factory Reset by a Remote Controller
1. When using Hisense Google TV, the other aspect that should be checked is whether the TV has been turned on and whether a stable power adapter is being used.
2. When the remote control is used, the Home button should be the button to be pressed to be able to display the home screen. Then a move to the “Settings” is required.
3. The other menu option under “Settings” is “System” which can also be chosen.
4. Look through the components on the window hit a down arrow then pick reset.
5. Select Factory reset and then select the option that follows after that which is to Erase everything.
6. Simply abide by the onscreen guidelines on what to do to finish the restoration process. The obtained TV will turn on automatically, and the start-up setup page will be present.
Therefore, through these steps, you will have accomplished resetting your Hisense Google TV for it to work optimally.
Methods to use in performing Hello and Goodbye to Hisense Fire TV
The procedure of resetting a Hisense Fire TV can be regarded as parallel to that of any other Hisense Smart TV. Here, you will know how it is done:
Hisense Fire TV Factory Resetting through a Remote Controller
1. Turn on the Hisense Fire TV and ensure that the TV is connected to a constant power source.
2. Using the remote control, press the “Home” button on the remote control checkout when on the home screen. Proceed to select the ‘Settings’ option.
3. In the drop-down menu in the “Settings” tab, click on “My Fire TV”.
4. Go down the list and click on “Factory Reset”.
5. You will be asked whether this is what you want to do. Click on “Reset” to continue. It is at this point that the actual factory reset of the TV begins and may take several moments.
6. Now restart the device, after the reset process ends. The screen or screen service view screen, which indicates the effect of the resting process is visible.
There are steps that one should follow to reset a Hisense Fire TV hence fixing several issues and returning normal operations of the device.
Factory Reset Which is Different from the Hisense TV Resetting Method
In case you have problems with your Hisense TV & would rather not do a factory reset see the following problem-solving techniques instead:
1. Ensure your TV’s firmware is up-to-date. Outdated software can cause performance issues, and in many cases, these issues can be fixed by downloading the available updates.
2. It is an easy solution to most low-level problems. Just switch off your television, disconnect it from the power cord for a couple of minutes, then reconnect the cord and switch it on.
3. If a particular app is failing, attempt to uninstall its application cache and data from the settings.
4. Wrong picture or sound conditions may severely limit the satisfaction gained from watching the television. Some of these functions should be modified to see whether they remedy the problem.
5. Confirm that all cables and connections are properly oriented and are in good working order. Intermittent connections may result in loss of signal.
There, probably, are methods that might help you solve the problems without the need to reset your Hisense TV in the first place.
FAQs
Q: Will I lose the videos and settings once I hard reset my Hisense TV?
A: Yes, rest assured that a factory data reset will wipe all apps and settings, personal information will also be cleared and the TV will revert to its factory settings.
Q: How regularly am I allowed to hard reset my Hisense television?
A: Resetting your TV should be done as a last resort whenever there are issues that fail to be resolved using other troubleshooting techniques.
Q: After conducting a factory reset, can data be re-installed?
A: No, a factory reset causes permanent loss of data by erasing it and no recovery is available.
Q: Does system restoration reset all types of lagging?
A: Even though many common technical problems may be resolved by a factory reset, this may not help with purely hardware problems. If problems persist, a Hisense customer support service should be contacted instead.
Q: Is there a way to create a copy of the preferences before resetting?
A: Sadly, if you own a Hisense television, there is no option to backup the settings. Important settings should thus be taken down on a piece of paper beforehand, before resetting.
Conclusion
The Hisense Smart TV remote works when resetting the device because changing the settings of a Hisense television usually works for most common issues and restores the device’s normal operational function. The Hisense smart television was manufactured either before, recently, Roku or Android televisions of Hisense, VIDAA TVs Google TVs, or Fire TVs. All the steps required in establishing are contained within this social comment instruction document.
